20 Steps to Start a Tool and Die Business
Starting a tool and die business means building the precision components — dies, jigs, fixtures, and tooling sets — that manufacturers depend on to produce everything from automotive parts to food-processing equipment. This guide walks through every step, from validating demand to landing your first paying customer.
Most people who read this are already building or fixing machines for pay. Maybe you've made a custom conveyor bracket for a neighbour's shop, or rebuilt a pump for cash. That counts. That is a real business, whether or not any paper says so yet. This guide meets you where you are. The paperwork exists to catch up to the work you already do — it does not come first, and starting without it does not mean you did anything wrong. Find your entry point above and begin there.
Machinery manufacturing means you design, build, or assemble machines and equipment that other businesses use to do their work. Before anything else, decide you are running this as a business and not just doing favours. That decision changes how you talk, quote, and follow up. This week, say it out loud to one person and write one sentence: "I build machines for people who pay me." Pick the kind of machine work that fits your skill and tools — a farmer's implement, a compressor, a cutting tool, a conveyor part. You do not need a name, a logo, or a shop yet. You need to be sure you are doing this. Everything below assumes you have decided.
You cannot build everything. Pick one thing you make and can repeat. Maybe it is a specific bracket, a rebuilt gearbox, a small welded frame, or a custom part cut to a drawing. Narrow beats broad when you start, because a narrow offer is easy to price, easy to describe, and easy to say yes to. Write down exactly what the buyer receives, what materials it uses, and roughly how long it takes you to make one. This week, describe your one thing in a single sentence a non-engineer could repeat. If you cannot explain it plainly, keep cutting until you can. That sentence becomes your offer, and you can add more later.
A tool and die business sells into a wide range of industries; the positions noted here are a representative sample. Industrial machinery wholesalers Industrial Machinery and Equipment Wholesalers purchase tooling to resell or to fulfill contracts with end-user manufacturers, and understanding their purchasing cycles helps with pricing and lead-time negotiations. On the direct-customer side, your shop will encounter buyers from agricultural support operations, chemical manufacturers, crop-production equipment producers, beverage and tobacco processors, and auto repair and parts fabrication operations — all of which depend on custom dies, fixtures, or jigs to keep their own production lines running. Coal mining and concrete contracting operations similarly need wear tooling and custom fixtures. The full range of industries that purchase from a tool and die business is larger than any short list can capture, and it shifts as your shop develops specializations.
A sale is when money changes hands for the thing you defined. Not a promise, not a maybe — a paid job. This week, go to one person who fits your buyer and offer to build the one thing. Tell them the price, agree on it, and take a deposit or full payment before you deliver. If you have already sold work, log your next one deliberately: write down who bought, what they paid, and how they found you. That record teaches you more than any plan. One real sale proves people want what you make and settles arguments in your own head. Do this before you spend money on anything else in this guide.
If you are already building and getting paid, you are operating as a business right now — most likely as a sole proprietor by default, without having chosen it. That is normal and it is not a problem. Now you get to choose on purpose. The main options are staying a sole proprietor, forming a limited liability company, or a corporation. Each changes how you are taxed and how much of your personal property is exposed if a machine you built causes harm or a customer sues. Machinery carries real liability, so this choice matters more here than in some trades. This week, read a plain-language comparison of these structures. Do not file anything yet — just understand the trade-offs so step 6 is an informed decision.
Now make it official. If you chose an LLC or corporation, you register it with your state's business filing office — usually the Secretary of State. If you stay a sole proprietor and use a name other than your own, you register that name with your state or county. This is the step where informal becomes formal, and it is a normal, ordinary thing that thousands of people do every week. You are not fixing a mistake; you are choosing a structure. This week, find your state's business registration website and read what it asks for. Have your business name and address ready. File when you understand what you are signing. Keep the confirmation — later steps need it.
Once your entity exists, get an Employer Identification Number from the IRS. It is free, you apply directly, and you get it the same day online. You need it to open a bank account, hire, and file taxes cleanly, even if you never have employees. Then check your state and local registrations: many states require a sales tax or seller's permit, and machinery sold to other businesses often involves resale rules. Your city or county may require a general business registration too. This week, apply for your EIN and look up your state's revenue department to see what a manufacturer must register for. Write down each account number as you get it. Keep them in one place.
A tool and die business falls into a low-regulatory-risk category, which means you are not chasing a specialized trade licence before you open your doors. The permissions your tool and die business needs are the same ones any small manufacturer requires: a business entity registration with your state's secretary of state office, a federal Employer Identification Number from the IRS, a local business licence or occupational tax certificate issued by your city or county, and a zoning clearance confirming that light manufacturing is permitted at your chosen location. If you hire employees, you will also need to register for state unemployment and withholding accounts. Confirm each requirement with your local and state offices before committing to a lease or equipment purchase.
Open a bank account in the business's name, separate from your personal money. This is the single cleanest habit you can build, and it makes every later step — taxes, pricing, records — far easier. Mixing personal and business money is the most common thing that trips up people who started informally, and it is easy to fix now. Take your EIN, your entity registration, and your ID to a bank or credit union and open a checking account. This week, do that, and from the next job forward, run every payment in and every material purchase out through it. If a customer pays you cash, deposit it into this account. One account, one clear picture of the business.
The first money a tool and die business spends goes in a consistent order regardless of scale. Entity formation and insurance come first — liability and property coverage for a shop full of precision machinery is not optional. Facility costs follow: lease deposits and any build-out needed to meet power, ventilation, and floor-load requirements for heavy equipment. The largest early outlay is machine tools themselves — CNC mills, EDM machines, surface grinders, and inspection equipment — whether purchased outright, financed, or acquired used. After equipment, raw material stock (tool steel, carbide blanks, and aluminum stock) must be on hand before the first job runs. Finally, software — CAD/CAM licenses and shop management systems — and tooling consumables round out the startup spend. The total range varies significantly based on shop size, whether equipment is new or used, and local real estate costs.
Machinery you build can fail, injure someone, or damage property, and that risk follows the product after it leaves your hands. Insurance is how you keep one bad job from ending the business. The main types to understand are general liability, product liability, and — if you have a workshop — property coverage for tools and equipment. If you hire anyone, most states require workers' compensation. Product liability matters especially here, because a manufacturer can be held responsible for how a machine performs in use. This week, call two independent insurance agents who handle manufacturers and describe exactly what you build. Ask what a shop your size typically carries. Get quotes in writing. You are gathering facts, not buying the first thing offered.
A tool and die business draws from a broader supply chain than most small manufacturers; the positions named here represent only a portion of that network. The most direct upstream source is iron and steel mills Iron and Steel Mills, which produce the tool steel and alloy rod stock that dies and fixtures are machined from. Machine shops Machine Shops serve a dual role — sometimes as a subcontractor when a job requires a process your shop does not run in-house, and sometimes as a peer supplier of semifinished components. Ferrous metal foundries Ferrous metal foundries supply cast blanks and rough-shaped stock for larger die sets where machining from solid bar would be wasteful. The full set of upstream suppliers for a tool and die business extends well beyond these three categories and will depend on the specific industries your shop serves.
When the work lives only in your head, you cannot repeat it reliably, teach it, or take a day off. Write down how you build your one thing, step by step: materials, measurements, machine settings, checks, and how you know it is finished. Keep it simple enough that you could hand it to a careful person and get the same result. For machinery, also write your inspection and safety checks — what you verify before a part ships. This week, make the machine once and write each step as you go. Save the drawings and settings. This document is the backbone of consistent quality, and it is what turns your skill into a business that does not depend only on you being present.
Bookkeeping is just knowing what came in, what went out, and what you have left. You do not need to be an accountant. Every week, record each sale, each material and tool purchase, and each other cost, using your business bank account as the source of truth. Keep receipts for metal, castings, machine time, and shipping — these are the costs that decide whether a job made money. A simple spreadsheet works to start; a tool like QuickBooks can automate it once volume grows. This week, set up your record for the current month and enter every transaction so far. Reconcile it against your bank statement. Do this weekly and tax time becomes a copy-and-paste job instead of a panic.
Taxes on a machinery business come in a few kinds: income tax on profit, self-employment tax if you are a sole proprietor or LLC, and sales tax if your state requires you to collect it. Because you sell to other businesses, resale exemptions and sales tax rules matter, so understand how they apply to what you make. Set aside a portion of every payment for taxes so the bill is never a surprise. This week, open a separate savings space and move a share of each sale into it. Look up your staterevenue department's guidance for manufacturers, and consider one paid hour with a tax professional to confirm what you owe and when. Getting this right early costs far less than fixing it later.
When the work is more than you can build alone, you get help two ways: hire a contractor for specific jobs, or take on an employee. A contractor uses their own tools, sets their own hours, and invoices you. An employee works under your direction and brings tax withholding, workers' compensation, and payroll rules. The difference is legal, not casual, and getting it wrong causes real problems — so know which you actually have. For machinery, a contract machinist or welder is a common first step before a full hire. This week, decide which task you would hand off first and write a clear description of it. Talk to one person who could do it. Do not hire until the work is steady enough to pay for the help.
The first three sales for a tool and die business almost always come from personal relationships rather than marketing. If you or a co-founder worked in manufacturing before starting this shop, the engineers and purchasing managers at your former employer — or at companies you serviced as a vendor — are the most realistic first calls. They already trust your work, and they know what a production delay costs them. Second, local manufacturers who are currently sending tooling work out of state or experiencing long lead times from their current shop are a natural target; a visit to an industrial park with a capability sheet and a short turnaround promise opens more doors than any advertisement. Third, job shops and contract manufacturers who occasionally need tooling they cannot make themselves will subcontract to a capable tool and die business, providing early revenue while your direct customer list grows.
Buyers who look for machinery suppliers online need to find you, and they need signals that you are real. Get listed where industrial buyers search: a Google Business Profile, relevant trade directories, and industrial marketplaces. Where a platform offers verification — proof of your registration, insurance, or capabilities — complete it, because verified suppliers get taken seriously by larger buyers. Fill each listing with the specific machines you make, your materials, and clear photos of finished work. This week, claim or create one listing and complete it fully, then start the verification process on one platform. Consistent name, address, and phone across every listing helps buyers and search engines trust you. A complete, verified profile does quiet selling for you around the clock.
You cannot tell if your business is healthy in a vacuum. Compare yourself to how machinery manufacturers typically run: what share of revenue goes to materials, what a job of your size usually takes, and what margin similar shops hold. When your numbers drift far from the norm, that is a signal to look — maybe your pricing is low, maybe your material waste is high, maybe you are faster than you thought and can charge more. This week, find one published benchmark for machinery manufacturing and put your own numbers beside it. Public sources like industry associations and government statistics give you honest reference points. This is not about matching everyone else; it is about knowing where you stand so you can decide what to change.
Now that you have proven the work, formalised it, and run it for real, write the plan — not before. A plan built on actual sales and real costs is worth ten built on guesses. Keep it short: what you make, who buys it, what it costs to build, what you charge, how you find buyers, and what you want the next year to look like. Add the one or two changes your benchmarks in step 19 pointed to. This week, write two pages, using your own records and a simple template — many are free through tools like the SBA. Revisit it every quarter and adjust as reality teaches you. The plan is a working document, not a trophy. It exists to guide decisions, not to sit in a drawer.
Starting this business? Get the printable one-page checklist for these 20 steps.
This is how to get started. If you want the whole thing — a plan with your numbers in it, benchmarked against federal figures for your industry, with the procedures for running it already written — that is what we build. A free template asks you to describe your customers. Ours names them.